| 基于状态反馈与PID相结合的主汽温控制方法研究 |
| |
| 引用本文： | 刘敏,叶林.基于状态反馈与PID相结合的主汽温控制方法研究[J].仪器仪表用户,2006,13(3):5-6. |
| |
| 作者姓名： | 刘敏 叶林 |
| |
| 作者单位： | 中国农业大学,信电学院,北京市,100083 |
| |
| 摘 要： | 针对火电厂主汽温系统的大滞后，大惯性以及动态特性随工况变化的不确定性等特性，本文运用了基于状态反馈与串级PID控制相结合的控制方案．并采用“ITAE性能准则”来进行状态反馈极点配置，同时文中给出了不同阶次惯性环节对应的最佳反馈系数，仿真结果表明，主汽温的动态特性得到明显改善。
|
| 关 键 词： | 主汽温控制 状态反馈 状态估计 最佳控制 |
| 文章编号： | 1671-1041（2006）03-0005-02 |
| 收稿时间： | 2005-12-28 |
| 修稿时间： | 2005年12月28 |
Main steam temperature control method based on state feedback combined with PID |
| |
| LIU Min,YE Lin.Main steam temperature control method based on state feedback combined with PID[J].Electronic Instrumentation Customer,2006,13(3):5-6. |
| |
| Authors: | LIU Min YE Lin |
| |
| Abstract: | In light of the large delay, strong inertia, and uncertainty characteristic of main steam temperature process, a control strategy based on state observer combined with PID control is presented, and the rule of ITAE is applied to pole assignment of state feedback. The optimal state feedback coefficient for different rank inertia transfer function is given in this paper. The simulation result shows that the dynamic characteristic of main steam temperature has been improved distinctly. |
| |
| Keywords: | ITAE |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
