| 热熔胶与环氧树脂胶粘结试件对人造板内结合强度检测值影响探讨 |
| |
| 引用本文： | 孟黎鹏,何超,张海霞,沈佳龙,周纯洁,王瑞明,万劲松. 热熔胶与环氧树脂胶粘结试件对人造板内结合强度检测值影响探讨[J]. 中国人造板, 2014, 0(12): 26-28 |
| |
| 作者姓名： | 孟黎鹏 何超 张海霞 沈佳龙 周纯洁 王瑞明 万劲松 |
| |
| 作者单位： | 吉林省林业科学研究院林产品质量监督检验站; |
| |
| 摘 要： | 使用热熔胶和环氧树脂胶粘结法进行人造板内结合强度检测试验对比,结果表明,在使用热熔胶粘结时,金属卡头的冷却方法对内结合强度影响很大,板材由于金属卡头温度的升高而引起的附加应力很难避免,会造成内结合强度检测的不确定性;在精确检测或者在出具质检报告时,要尽量使用环氧树脂胶粘结试件。
|
| 关 键 词： | 人造板 内结合强度 环氧树脂 热熔胶 平衡 冷却 |
Difference Between Hot-Melt Adhesive and Epoxy Resin on Testing Internal Bond Strength of Wood-based Panels |
| |
| Meng Lipeng,He Chao,Zhang Haixia,Shen Jialong,Zhou Chunjie,Wang Ruiming,Wan Jinsong. Difference Between Hot-Melt Adhesive and Epoxy Resin on Testing Internal Bond Strength of Wood-based Panels[J]. China Wood-Based Panels, 2014, 0(12): 26-28 |
| |
| Authors: | Meng Lipeng He Chao Zhang Haixia Shen Jialong Zhou Chunjie Wang Ruiming Wan Jinsong |
| |
| Affiliation: | ( Quality Supervision and Test Center for Wooden Production of Jilin Forestry Science Institute, Changchun 130032, China) |
| |
| Abstract: | The difference between using hot-melt adhesives on testing the internal bond strength of wood-based panels were compared following the standard protocol using epoxy resin bonding method. The results indicated that the cooling method of the metal chuck had a signifi cant effect on the internal bond strength. The additional stress of the panel caused by the increase of the metal chuck temperature was hard to avoid. This would cause the detection uncertainty of the internal bond strength. |
| |
| Keywords: | wood-based panels internal bond strength epoxy resin hot-melt adhesive balance cooling |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
