| 20CrMo钢短裂纹行为和抽油杆表面允许裂纹深度 |
| |
| 引用本文： | 骆竞Xi 李航月.20CrMo钢短裂纹行为和抽油杆表面允许裂纹深度[J].石油机械,1997,25(6):18-20. |
| |
| 作者姓名： | 骆竞Xi 李航月 |
| |
| 作者单位： | 西安交通大学金属材料强度国家重点实验室!陕西省西安市710049(骆竞晞)，西安交通大学金属材料强度国家重点实验室(李航月，王新刚) |
| |
| 摘 要： | 研究了抽油杆材料20CrMo钢穿透长、短裂纹和表面长、短裂纹在近门坎区的裂纹扩展行为。结果表明：短裂纹比长裂纹的裂纹扩展速率更快，门坎值更低，表面允许裂纹深度更小。因此，用长裂纹扩展速率和门坎值计算抽油杆剩余寿命，比考虑短裂纹效应的要高，最好使用裂纹扩展速率与有效应力强度因子幅计算抽油杆的剩余寿命。用短裂纹的门坎值重新计算了D级抽油杆各关键部位允许存在的裂纹尺寸。
|
| 关 键 词： | 抽油杆 裂纹扩展 允许裂纹深度 |
Short crack extension of 20CrMo steel and tolerant depth of sucker rod surface crack |
| |
| Luo Jingxi.Short crack extension of 20CrMo steel and tolerant depth of sucker rod surface crack[J].China Petroleum Machinery,1997,25(6):18-20. |
| |
| Authors: | Luo Jingxi |
| |
| Abstract: | The difference between the extension of short cracks and long cracks on 20CrMo steel is investigated. The resultshows that the extension rate of the short crack is higher, its threshold value and the allowable surface crack depth areminor than that of the long crack. Therefore the residual life of sucker rod calculated by the extension rate and thresholdvalue of the long crack is higher than that calculated in consideration of the short crack effect, and it is preferable to cal-culate the residual life of the Sucker rod by the crack extension rate and the effective stress strength factor amplitude. Theallowable sizes of the cracks on the key locations of the sucker rod is calculated again with the short crack threshold. |
| |
| Keywords: | sucker rod crack extension tolerant crack depth |
| 本文献已被 CNKI 维普 等数据库收录！ |
