| Abstract: | Low‐density polyethylene (LDPE) with different quantities of starch was compounded using a twin screw extruder and blown into films by a Konar K, blow‐film machine. Mechanical properties, namely percent elongation, tensile, bursting, and tear strength, as well as barrier properties, such as water vapor and oxygen transmission rate, of the filled LDPE film were studied. Thermal properties of the films were studied using DSC and DMA. Master curves at reference temperature of 30°C were obtained using software linked to DMA. Incorporation of 1% starch in LDPE has marginally affected the thermal, barrier, and mechanical properties; however, that of 5% starch filled LDPE has affected the properties to a great extent. The mechanical properties, such as percent elongation, tensile, tear, bursting, and seal strength, decreased by 19.2, 33.6, 3.60, 10.8, and 22.12%, respectively. Similarly, water vapor and oxygen transmission rate increased to 32.5 and 18.3%, respectively. Other physical properties, namely migration and thermal properties, were also affected in 5% starch filled LDPE; however, the film can still be used as packaging material. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3355–3364, 2006 |
