| Abstract: | A new potential preparation method named in situ organic modification was used to prepare intercalated polybutadiene rubber (BR)/clay/dimethyl dihydrogenated tallow ammonium chloride (DDAC) composites. That is, BR, pristine clay, and intercalatant DDAC were directly mixed in a Haake rheometer without pretreating the pristine clay with the intercalatant. The morphology of the BR/clay composites was investigated by means of X‐ray diffraction and scanning electron microscopy. The thermal stability of the BR/clay composites was analyzed by thermogravimetric analysis (TGA). The dispersion of clay particles in the BR/clay/DDAC composites is much better than that in the BR/pristine clay and similar to that in the BR/organoclay DK4 (modified with DDAC) composites. BR/clay/DDAC composites have much higher thermal stability than the gum BR, BR/pristine clay, and BR/DK4 composites. The clay/intercalatant ratio has little influence on the thermal stability of the BR/clay/DDAC composites, while clay content has a significant effect on their thermal stability. The enhanced thermal stability of the BR/clay/DDAC composites is related to the dispersion state of clay particles in BR. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 905–913, 2006 |
