4,4′‐Bismaleimidodiphenyl methane modified novolak resin/titania nanocomposites: Preparation and properties |
| |
Authors: | Guotao Lu Ying Huang Yehai Yan Tong Zhao Yunzhao Yu |
| |
Affiliation: | Plant Polymer Research Unit, U.S. Department of Agriculture, Agricultural Research Service, National Center for Agricultural Utilization Research, Peoria, Illinois 61604 |
| |
Abstract: | 4,4′‐Bismaleimidodiphenyl methane modified novolak resin/titania nanocomposites were prepared by the sol–gel process of tetrabutyl titanate in the presence of 4,4′‐bismaleimidodiphenyl methane modified novolak resin prepolymers with acetyl acetone as a stabilizer. These nanocomposite materials were characterized by Fourier transform infrared analysis, dynamical mechanical analysis, thermogravimetric analysis, transmission electron microscopy, and field emission scanning electron microscopy. Nanometer titania particles were formed in the novolak resin matrix, and the average original particle size of the dispersed phase in the nanocomposites was less than 150 nm, but particle aggregates of larger size existed. The introduction of the titania inorganic phase with a nanoscale domain size did not improve the glass‐transition temperature of the nanocomposites but lowered the thermal resistance of the material because of the incomplete removal of acetyl acetone coordinated with tetrabutyl titanate, and it improved the modulus of the material at lower temperatures (<200°C) but lowered the modulus at higher temperatures (>250°C). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 52–57, 2006 |
| |
Keywords: | nanocomposites resins thermal properties |
|
|