首页 | 本学科首页   官方微博 | 高级检索  
     

硫化体系对NBR/PCMO共混物性能的影响
引用本文:彭璐,陈运熙,王克山,孙冬梅.硫化体系对NBR/PCMO共混物性能的影响[J].橡胶工业,2004,51(1):20-23.
作者姓名:彭璐  陈运熙  王克山  孙冬梅
作者单位:1. 北京橡胶工业研究设计院,北京,100039
2. 黑龙江鸡西恒立工程塑料厂,黑龙江,鸡西,158149
摘    要:研究不同硫化体系对NBR/氯化聚醚(PCMO)共混物性能的影响。试验结果表明,低硫高促硫化体系共混物硫化胶的耐热空气老化性能较好,复合硫化体系共混物硫化胶的压缩永久变形性能最佳;过氧化物硫化体系中硫化剂DCP用量为3.5份,甲基丙烯酸锌Zn(MMA)2]/DCP硫化体系中Zn(MMA)2用量为10份、硫化剂DCP用量为

关 键 词:丁二烯  丙烯腈  氯化聚醚  硫化体系  物理性能  压缩永久变形  耐热空气老化性能  NBR/PCMO共混物
文章编号:1000-890X(2004)01-0020-04
修稿时间:2003年7月23日

Effect of curing system on properties of NBR/PCMO blend
PENG Lu,CHEN Yun-xi,WANG Ke-shan and SUN Dong-mei.Effect of curing system on properties of NBR/PCMO blend[J].China Rubber Industry,2004,51(1):20-23.
Authors:PENG Lu  CHEN Yun-xi  WANG Ke-shan and SUN Dong-mei
Affiliation:PENG Lu~1,CHEN Yun-xi~1,WANG Ke-shan~2,SUN Dong-mei~2
Abstract:The effect of different curing systems on the properties of NBR/PCMO blend was investigated.The results showed that the low sulfur-high accelerator curing systems resulted in the NBR/PCMO vulcanizates with better hot air aging properties and the complex curing systems gave the vulcanizates the optimum compression set;and the vulcanizate with the best comprehensive properties was obtained when 3.5 phr DCP in peroxide curing system or 10 phr Zn(MMA)_2 and 2.5 phr DCP in Zn(MMA)_2/DCP complex curing system were used.
Keywords:NBR  PCMO  curing system  compression set  hot air aging
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《橡胶工业》浏览原始摘要信息
点击此处可从《橡胶工业》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号