| 碳纤维缠绕气瓶用环氧树脂体系的固化工艺研究 |
| |
| 引用本文： | 齐磊,黄兴,刘扬涛. 碳纤维缠绕气瓶用环氧树脂体系的固化工艺研究[J]. 纤维复合材料, 2012, 0(1): 45-47,41 |
| |
| 作者姓名： | 齐磊 黄兴 刘扬涛 |
| |
| 作者单位： | 1. 中国复合材料集团有限公司,北京100037 沈阳中复科金压力容器有限公司,沈阳110141
2. 中国复合材料集团有限公司,北京,100037 |
| |
| 基金项目： | 辽宁省科技成果转化项目 |
| |
| 摘 要： | 目前国内外对环氧树脂固化工艺研究较多，但针对LY564环氧树脂体系在高压气瓶特殊应用环境中的研究却较少。本文对该树脂体系进行了不同升温速率的DSC分析，用流变仪对该树脂体系的等温粘度和动态粘度进行了测试，并且用DMA对该树脂体系的玻璃化转变温度进行测定，实验结果表明了LY564环氧树脂体系应用于碳纤维缠绕气瓶的适用性，并确定了该树脂体系的理论固化工艺。
|
| 关 键 词： | 环氧树脂 纤维缠绕 高压气瓶 固化工艺 DSC DMA |
Research on Curing Process of Carbon Fiber/Epoxy Resin Filament Winding Gas Cylinders |
| |
| QI Lei,HUANG Xing,LIU Yangtao. Research on Curing Process of Carbon Fiber/Epoxy Resin Filament Winding Gas Cylinders[J]. Fiber Composites, 2012, 0(1): 45-47,41 |
| |
| Authors: | QI Lei HUANG Xing LIU Yangtao |
| |
| Affiliation: | 1,2(1.China Composite Group CO.,LTD.,Beijing 100037,China)(2.Shenyang Zhongfukejin Pressure Vessels CO.,LTD.,Shenyang 110141,China) |
| |
| Abstract: | Although there are some papers about the curing process of epoxy resin system,the research about the LY564 epoxy resin system applied to the carbon fiber high-pressure cylinders is not so much.DSC,Rheometer and DMA were used in this paper to investigate the curing property and glass transition temperature of this resin system.The experimental results showed the LY564 epoxy resin system was suitable for carbon fiber filament winding gas cylinders and determined the theoretical curing process of this resin system. |
| |
| Keywords: | epoxy filament winding high-pressure gas cylinders curing DSC DMA |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
