| 铝阳极氧化膜多色彩电解着色工艺 |
| |
| 引用本文： | 朱祖芳. 铝阳极氧化膜多色彩电解着色工艺[J]. 电镀与涂饰, 2006, 25(6): 42-45 |
| |
| 作者姓名： | 朱祖芳 |
| |
| 作者单位： | 北京有色金属研究总院,北京,100088 |
| |
| 摘 要： | 简述了多色彩电解着色工艺的发展和特点,介绍了2种达到多色化显色的方法:阳极氧化膜底部扩孔处理和调整阳极氧化膜阻挡层。给出了扩孔处理过程中阳极氧化膜横断面的显微结构变化示意图,并给出了“阻挡层调整”实现多色化的工艺参数。描述了多色化阳极氧化膜的性能,并对比了电泳涂漆前后多色彩电解着色样品的颜色。
|
| 关 键 词： | 铝阳极氧化膜 电解着色 多色化显色 电泳涂漆 |
| 文章编号： | 1004-227X（2006）06-0042-04 |
| 收稿时间： | 2006-11-07 |
| 修稿时间： | 2006-11-07 |
Electrolytic multi-coloring technique of anodic coating on aluminum |
| |
| ZHU Zu-fang. Electrolytic multi-coloring technique of anodic coating on aluminum[J]. Electroplating & Finishing, 2006, 25(6): 42-45 |
| |
| Authors: | ZHU Zu-fang |
| |
| Affiliation: | Beijing General Research lnstitue of Nonferrous Metals, Beijing 100088, China |
| |
| Abstract: | The development and characteristic of multi-coloring technique were described. Two methods to obtain the multicoloring were introduced: reaming on the bottom of anodic oxidation film and blocking layer adjusting of anodic oxidation film. The sketch map of change on microstructure of anodic oxidation film during the reaming process and the process parameters for obtaining the multi-coloring by blocking layer adjusting were presented. The performance of the multi-color anodic oxidation film was described, and a comparison between the colors of multi-coloring samples before and after electrophoresis coating was given. |
| |
| Keywords: | anodic coating on aluminum electrolytic coloring multi-coloring electrophoresis coating |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
