首页 | 本学科首页   官方微博 | 高级检索  
     

单向张弦梁结构下部撑杆计算长度的近似分析
引用本文:钟志和,孙文波,韦桂湘.单向张弦梁结构下部撑杆计算长度的近似分析[J].淮海工学院学报,2003,12(4):67-69.
作者姓名:钟志和  孙文波  韦桂湘
作者单位:[1]东莞市虎门建筑设计院,广东东莞523930 [2]华南理工大学建筑设计研究院,广东广州510641
摘    要:近年来张弦梁结构在大跨度结构工程中得到了日益广泛的应用,针对其撑杆稳定性计算中的计算长度问题,考虑到张弦梁结构下部受拉弦索对撑杆的非线性支承作用,提出了在实际工程中确定撑杆计算长度的一种近似方法。通过对其平面外刚度及受力进行分析,并结合具体算例,得出对于两端铰接的撑杆,其计算长度系数可偏于安全地近似取为1.0。

关 键 词:单向张弦梁结构  撑杆  计算长度  平面外刚度  大跨度结构
文章编号:1008-3499(2003)04-0067-03
修稿时间:2003年9月8日

An Approximate Analysis of Calculating Length Coefficient of Strut in One-way Beam-string-structure
ZHONG Zhi-he,SUN Wen-bo,WEI Gui-xiang.An Approximate Analysis of Calculating Length Coefficient of Strut in One-way Beam-string-structure[J].Journal of Huaihai Institute of Technology:Natural Sciences Edition,2003,12(4):67-69.
Authors:ZHONG Zhi-he  SUN Wen-bo  WEI Gui-xiang
Affiliation:ZHONG Zhi-he~1,SUN Wen-bo~2,WEI Gui-xiang~2
Abstract:Recently beam-string-structures have been widely used in large-span structures. In order to calculate the length coefficient of strut in beam-string-structure, the nonlinear supporting effect on strut by tensile cable must be considered. Therefore an approximate method to analyze the calculating length coefficient of strut is proposed. Analyses to the outside-plane strength and force and practical calculations show that the calculating length coefficient of a strut with two hinges is 1.0.
Keywords:beam-string-structure  calculating length coefficient  stable  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号