| AZ91D镁合金的半固态加工研究 |
| |
| 引用本文： | 王怀国,张景新,张奎,徐骏,石力开. AZ91D镁合金的半固态加工研究[J]. 特种铸造及有色合金, 2003, 0(4): 10-13 |
| |
| 作者姓名： | 王怀国 张景新 张奎 徐骏 石力开 |
| |
| 作者单位： | 北京有色金属研究总院 |
| |
| 基金项目： | 国家 973计划项目 (G2 0 0 0 0 6 72 0 2 ) |
| |
| 摘 要： | 研究了AZ91D镁合金热挤压坯料在二次加热过程中的组织演化，探讨了AZ91D合金在二次加热过程中液相产生的机理，给出了液相体积分数与再结晶组织的关系。试验证明：提高二次加热的升温速度可以细化再结晶晶粒，增加一定条件下的液相体积分数，从而改善合金坯料的触变性能。采用半固态工艺压铸了汽车空压机连杆，对压铸件进行了质量评价。
|
| 关 键 词： | AZ91D镁合金 二次加热 组织演化机制 半固态压铸 |
| 文章编号： | 1001-2449(2003)04-0010-04 |
| 修稿时间： | 2003-03-06 |
Microstructural Evolution of AZ91D Extruded Feedstock during Reheating and Its Semi-solid Die Casting |
| |
| Wang Huaiguo Zhang Jingxin Zhang Ku i Xu Jun Shi Likai. Microstructural Evolution of AZ91D Extruded Feedstock during Reheating and Its Semi-solid Die Casting[J]. Special Casting & Nonferrous Alloys, 2003, 0(4): 10-13 |
| |
| Authors: | Wang Huaiguo Zhang Jingxin Zhang Ku i Xu Jun Shi Likai |
| |
| Abstract: | Microstructural evolution of AZ91D extruded feedstock a nd the mechanism of liquid phase formation during reheating were investigated. Liquid volume fraction related to the recrystallized microstructu re was examined. The results showed that increase in reheating rate can refine r ecrystallized grain and increase liquid volume fraction under certain condition so as to improve the thixotropy of the feedstock. The connecting rod of air comp ressor for motor car was made by semi solid process and the quality of the die castings wa s evaluated. |
| |
| Keywords: | AZ91D Mg Alloy Reheating Microstructural Evolution Mechanism Semi solid Die Casting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
