| 基于LabVIEW的包装六面体跌落方位控制研究 |
| |
| 引用本文： | 常英英,卢博友,周新梅.基于LabVIEW的包装六面体跌落方位控制研究[J].包装工程,2012,33(15):37-39,112. |
| |
| 作者姓名： | 常英英 卢博友 周新梅 |
| |
| 作者单位： | 西北农林科技大学 |
| |
| 基金项目： | 陕西省科学技术研究发展计划项目(2010K01-21) |
| |
| 摘 要： | 对跌落方位的控制是跌落试验机自动控制技术的核心,目前大多采用人为固定跌落方位。为了降低操作复杂程度和人为误差等因素的影响,设计了一种基于虚拟仪器LabVIEW的包装六面体棱跌落的控制方案。方案采用梁式测力传感器将测得的信号通过数据采集卡传输到主机端,然后用LabVIEW软件对采集的数据进行实时显示、监测与控制。
|
| 关 键 词： | 跌落试验机 包装六面体跌落方位控制 数据采集系统 LabVIEW |
| 收稿时间： | 2012/6/11 0:00:00 |
| 修稿时间： | 2012/8/10 0:00:00 |
Research of Packaged Hexahedron Drop Orientation Control Based on LabVIEW |
| |
| CHANG Ying-ying,LU Bo-you and ZHOU Xin-mei.Research of Packaged Hexahedron Drop Orientation Control Based on LabVIEW[J].Packaging Engineering,2012,33(15):37-39,112. |
| |
| Authors: | CHANG Ying-ying LU Bo-you and ZHOU Xin-mei |
| |
| Affiliation: | (Northwest A &F University,Yangling 712100,China) |
| |
| Abstract: | Drop orientation control is the core of automatic control technology of drop tester.Currently the most common way of fixed drop orientation is manual.To reduce the influence of complex manipulation and artificial error,a control scheme of edge drop of packaged hexahedron based on virtual instrument LabVIEW was designed.The signal measured by beam type sensor is transmitted to host through a data collecting card.Then,the collected data can be displayed,monitored,and controlled real-time through the software LabVIEW. |
| |
| Keywords: | drop test machine drop orientation control of packaged hexahedron data acquisition system LabVIEW |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《包装工程》浏览原始摘要信息 |
|
点击此处可从《包装工程》下载全文 |
