| 电火花加工中放电间隙状态的识别技术研究 |
| |
| 引用本文： | 伍俊,李明辉.电火花加工中放电间隙状态的识别技术研究[J].模具技术,2000(1):85-89. |
| |
| 作者姓名： | 伍俊 李明辉 |
| |
| 作者单位： | 上海交通大学,塑性成形工程系,上海,200030 |
| |
| 摘 要： | 首先分析了电火花加工中放电间隙脉冲的四种典型状态，然后论述了间隙脉冲传统的识别技术和基于人工智能理论的识别技术，指出了基于人工智能理论用计算机软件进行的识别技术是这一领域新的发展方向。
|
| 关 键 词： | 电火花加工 放电间隙 识别技术 人工智能 |
| 文章编号： | 1001-4934(2000)01-0085-05 |
| 修稿时间： | 1999-04-11 |
Study on the ldentification Technology of EDM's Discharging Gap-state |
| |
| WU Jun,LI Ming-hui.Study on the ldentification Technology of EDM's Discharging Gap-state[J].Die and Mould Technology,2000(1):85-89. |
| |
| Authors: | WU Jun LI Ming-hui |
| |
| Abstract: | First, the paper analyses four typical pulse wave-forms of the discharging gap during electrical discharge machining. Then, the conventional identification techniques and the AI based identification techniques are analysed in detail. At last, It is pointed out that the AI based identification technique by computer software is a new promising method in this field. |
| |
| Keywords: | EDM discharging gap identification techniques pulse wave-form AI |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
