| 嵌入式风缸盖工艺与模具设计 |
| |
| 引用本文： | 王兴辉.嵌入式风缸盖工艺与模具设计[J].模具工业,2009,35(8):36-38. |
| |
| 作者姓名： | 王兴辉 |
| |
| 作者单位： | 石家庄市车辆厂,河北石家庄,050000 |
| |
| 摘 要： | 分析了嵌入式风缸盖的工艺特点,确定了最终的加工工艺,介绍了拉深模和落料模的设计思路、模具结构特点。生产证明,嵌入式风缸盖的制作工艺可行,拉深模和落料模设计合理,取得了较好的效果。
|
| 关 键 词： | 嵌入式风缸盖 制作工艺 模具结构 |
Manufacturing technique and design of die for embedded cylinder head |
| |
| WANG Xing-hui.Manufacturing technique and design of die for embedded cylinder head[J].Die & Mould Industry,2009,35(8):36-38. |
| |
| Authors: | WANG Xing-hui |
| |
| Affiliation: | Shijiazhuang Rolling Stock Works;Shijiazhuang;Hebei 050000;China |
| |
| Abstract: | The manufacturing technique of an embedded cylinder head was analyzed; and the processing method was determined.The design and structural characteristic of a drawing die and a blanking die for the forming of the part were presented. |
| |
| Keywords: | embedded cylinder head manufacturing technique die structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
