| 场发射显示器的基板形变分析 |
| |
| 引用本文： | 袁旦,储开荣,狄云松,雷威,张晓兵.场发射显示器的基板形变分析[J].真空电子技术,2006(1):65-67. |
| |
| 作者姓名： | 袁旦 储开荣 狄云松 雷威 张晓兵 |
| |
| 作者单位： | 东南大学,电子工程系,江苏,南京,210096 |
| |
| 基金项目： | 高等学校博士学科点专项科研项目;科技部科研项目 |
| |
| 摘 要： | 采用碳纳米管作为发射源的碳纳米管场致发射显示器是一种新型的平板显示器件。本文由FED基板形变方程出发，用ANSYS软件模拟了阳极基板的厚度对基板形变的影响，得出了厚度和基板形变的关系。在实际制备中采用了新型的基板结构，不仅在显示均匀性方面得到提高，而且降低了成本。
|
| 关 键 词： | 场致发射显示器 有限元法 基板形变 |
| 文章编号： | 1002-8935(2006)01-0065-03 |
| 收稿时间： | 2005-12-15 |
| 修稿时间： | 2005年12月15 |
Base Plate Deformation Analysis of Field Emission Display |
| |
| YUAN Dan,CHU Kai-rong,DI Yun-song,LEI Wei,ZHANG Xiao-bing.Base Plate Deformation Analysis of Field Emission Display[J].Vacuum Electronics,2006(1):65-67. |
| |
| Authors: | YUAN Dan CHU Kai-rong DI Yun-song LEI Wei ZHANG Xiao-bing |
| |
| Affiliation: | Department of Electronic Engineering, Southeast University, Nanjing 210096, China |
| |
| Abstract: | The carbon nanotube has been used as the electron source in a field emission display panel. This paper studies the deforming of the substrate in a FED with ANSYS software. The influence of the thickness of substrate on the deforming has been obtained. In the practical fabrication, a new substrate structure has been used. The uniformity of the brightness has been improved with this new structure. Apart from this, the cost of the manufacture can also be reduced with this new structure. |
| |
| Keywords: | ANSYS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
