Connecting the second exhaust-heat boiler to the operating first one under the conditions of flow circuits of combined-cycle plants with two gas-turbine units and one steam turbine |
| |
Authors: | Yu. A. Radin I. A. Grishin T. S. Kontorovich O. B. Panshina A. V. Chugin |
| |
Affiliation: | (1) All-Russia Thermal Engineering Institute (VTI), Moscow, Russia;(2) “North-West Cogeneration Plant” Company, Russia |
| |
Abstract: | Problems arising with connecting the second exhaust-heat boiler to the first exhaust-heat boiler under load in the case of flow circuits of combined-cycle plants of type PGU-450 are considered. Similar problems exist for two-boiler single-turbine units of type PGU-325 and for two-boiler single-turbine units of traditional steampower plants with an output of 200–300 MW upon connection of the second furnace of a two-furnace boiler to the operating first furnace. Analysis of the temperature-induced stressed state and of the cyclic strength of thick-walled elements of the steam-water conduit of PGU-450 and of two-furnace boilers of two-boiler single-turbine units with an output of 200–300 MW (the check valve, the inlet header of the water economizer) is used for determining the steam temperature differences in the high-pressure conduits to the steam turbine and the order of connection of the second exhaust-heat boiler to the operating fist one. Modes of enabling a two-boiler single-turbine unit of a combined-cycle plant, which are most “rigid” from the standpoint of thermal strength, are determined. __________ Translated from élektricheskie Stantsii, No. 2, February 2006, pp. 11–17. |
| |
Keywords: | combined-cycle plant (CCP) two-boiler single-turbine unit (TBSTU) exhaust-heat boiler (EHB) gas-turbine unit (GTU) steam turbine (ST) pipeline economizer temperature-induced stressed state cyclic strength finite-element method |
本文献已被 SpringerLink 等数据库收录! |