A comparative evaluation of the wear of ultra-high molecular weight polyethylene abraded by Ti-6Al-4V

The study was initiated to assess the suitability of Ti-6Al-4V as a metal which articulates against Ultra High Molecular Weight (UHMW) polyethylene in total joint applications. The wear surfaces of Ti alloy were prepared to different levels of surface roughness and the effect of various surface chemical treatments were examined. A specially designed annular contact laboratory wear tester was developed to provide the surface loading and articulation. Comparative tests were also performed using 316 LVM stainless steel and Co-Cr-Mo alloy metallic wear components. All annular contact wear tests were performed in mammalian Ringer's solution environments and were evaluated using standard statistical techniques. Scanning electron microscope (SEM) analysis of the wear surfaces indicates the formation of a polyethylene transfer film on all metal surfaces. The surface of the UHMW polyethylene samples after testing was considerably rougher than the original articulating metallic surface; the transfer film on the metal surfaces was responsible for this. It was concluded that Ti-6Al-4V is satisfactory for total joint replacement when used in combination with UHMW polyethylene. Proper surface preparation may allow lower rates of wear than conventional orthopaedic alloys.