Multiaxial small fatigue crack growth in metals

Observations related to the formation and growth of small cracks ranging from subgrain dimension up to the order of 1 mm are summarized for amplitudes ranging from low cycle fatigue (LCF) to high cycle fatigue (HCF) conditions for polycrystalline metals. Further efforts to improve the accuracy of life estimation which address LCF, HCF and LCF–HCF interactions must consider various factors that are not presently addressed by conventional elastic–plastic fracture mechanics (EPFM) or linear elastic fracture mechanics (LEFM) approaches based on long, self-similar cracks in homogeneous, isotropic materials, nor by conventional HCF design tools such as the ε–N curve, the S–N curve, modified Goodman diagram and fatigue limit.Development of microstructure-sensitive fatigue crack propagation relations relies on deeper understanding of small crack behavior, including (a) interactions with microstructure and lack of constraint for microstructurally small cracks, (b) heterogeneity and anisotropy of cyclic slip processes associated with the orientation distribution of grains, and (c) local mode mixity effects on small crack growth. The basic technology is not yet sufficiently advanced in these areas to implement robust damage tolerant design for HCF. This paper introduces an engineering model which approximates the results of slip transfer calculations related to crack blockage by microstructure barriers; the model is consistent with critical plane concepts for Stage I growth of small cracks, standard cyclic stress–strain and strain–life equations above threshold, and the Kitagawa diagram for HCF threshold behaviors. It is able to correlate the most relevant trends of small crack growth behavior, including crack arrest at the fatigue limit, load sequence effects, and stress state effects.