| 镀镍溶液常见杂质的影响和去除 |
| |
| 引用本文： | 张丽艳.镀镍溶液常见杂质的影响和去除[J].一重技术,2005(6):22-23. |
| |
| 作者姓名： | 张丽艳 |
| |
| 作者单位： | 齐齐哈尔大华电气有限公司,黑龙江,富拉尔基,161041 |
| |
| 摘 要： | 硫酸盐镀镍溶液中,镀层常常会出现针孔、脱皮、粗糙、发黑或有条纹等故障,这些故障往往是与镀液中铁、铜、锌、铬、硝酸根等杂质有关系,根据不同杂质的影响采用不同种方法去除杂质。
|
| 关 键 词： | 镀镍 电解液 镀层 杂质 故障 |
| 文章编号： | 1673-3355（2005）06-0009-02 |
| 收稿时间： | 2005-11-01 |
| 修稿时间： | 2005-11-012005-11-28 |
Influence and removing of usual impurity contained in the solution for nickel plating |
| |
| ZHANG Li-yan.Influence and removing of usual impurity contained in the solution for nickel plating[J].CFHI Technology,2005(6):22-23. |
| |
| Authors: | ZHANG Li-yan |
| |
| Affiliation: | ZHANG Li-yan |
| |
| Abstract: | The nickel plating was always found some defects like pinhole, molt, coarse, blackening or stripe while sulfate solution is used. Such defects was considered related to some impurities, that was contained in plating solution like iron, copper, zinc, chrome, nitrate radical, etc. The article describes that the impurity shall be removed by different ways according to the affect due to different impurity. |
| |
| Keywords: | nickel plating electrolyte plating impurity failure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
