首页 | 本学科首页   官方微博 | 高级检索  
     

混凝土聚脲涂层配套单组分聚氨酯底漆的附着生研究
引用本文:吕平,丁国雷,马学强.混凝土聚脲涂层配套单组分聚氨酯底漆的附着生研究[J].新型建筑材料,2011,38(9).
作者姓名:吕平  丁国雷  马学强
作者单位:青岛理工大学功能材料研究所,山东青岛,266033
摘    要:研究了3种用于混凝士防护的聚脲涂层的单组分聚氨酯底漆(底漆1~底漆3)的缺陷封闭效果,考察了环境温度和湿度对聚氨酯底漆与混凝土附着性能的影响,以及喷涂聚脲后涂层与混凝土之间附着力随时间的变化规律.结果表明,底漆涂刷前为均匀黏稠体,无凝胶、结块,涂刷后漆膜质量良好,未出现发泡、回缩或缩孔现象;喷涂聚脲后,涂刷3种聚氨酯底漆后聚脲对混凝土的附着力随着时间的增加而分别增至5.63、5.39、6.09 MPa,随后趋于稳定.

关 键 词:单组份聚氨酯底漆  聚脲涂层  附着力  缺陷封闭效果

Research on the adhesive property of one-component polyurethane primers for concrete protective polyurea coatings
LV Ping,DING Guolei,MA Xueqiang.Research on the adhesive property of one-component polyurethane primers for concrete protective polyurea coatings[J].New Building Materials,2011,38(9).
Authors:LV Ping  DING Guolei  MA Xueqiang
Affiliation:LV Ping,DING Guolei,MA Xueqiang(Institute of Functional Materials,Qingdao Technological University,Qingdao 266033,Shandong,China)
Abstract:The defect closure effect of three different types of one-component polyurethane primers(primer 1~3) applied in concrete protective polyurea coatings were researched in this paper.The influence of ambient temperature and humidity to adhesion and the adhesion development trends with time was also studied.The results indicated that:the primer was sticky liquid,no gelling,no lumping before painted,while it performed good coating film quality after painted,no foaming and blebs are detected after painted.The dev...
Keywords:one-component polyurethane primer  polyurea coating  adhesive strength  defect closure effect  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号