| Ni-P-纳米化学复合镀层制备工艺的研究 |
| |
| 引用本文： | 宿辉,李春彦,王威.Ni-P-纳米化学复合镀层制备工艺的研究[J].黑龙江工程学院学报,2010,24(1):43-45,56. |
| |
| 作者姓名： | 宿辉 李春彦 王威 |
| |
| 作者单位： | 黑龙江工程学院材料与化学工程系;牡丹江医学院; |
| |
| 基金项目： | 黑龙江省科技攻关项目(GC06A208);;黑龙江省教育厅资助项目(1152G31) |
| |
| 摘 要： | 为提高化学复合镀层的性能，采用纳米（SiC）r制备Ni-P-纳米（SiC）p化学复合镀层，较系统地研究镀液配方及各工艺参数对Ni-P-纳米（SiC）r化学复合镀层的影响，分析相应机理，同时对镀层进行热处理比较。实验结果表明：主盐、还原剂、温度、pH值、搅拌速率及（SiC）p加入量对Ni-P-（SiC）p镀层的沉积速率有较大影响，实验确定的最佳主盐浓度为28g/L、还原剂浓度为30g／L、施镀温度为（85±1）℃、pH值为4．5、搅拌速度为200r／min、（SiC）p加入量为2g／L。
|
| 关 键 词： | （SiC）p 化学复合镀层 工艺参数 纳米 |
Study on technology of Ni-P-Nano-(SiC)P electroless composite coating |
| |
| XU Hui,LI Chun-yan,WANG Wei.Study on technology of Ni-P-Nano-(SiC)P electroless composite coating[J].Journal of Heilongjiang Institute of Technology,2010,24(1):43-45,56. |
| |
| Authors: | XU Hui LI Chun-yan WANG Wei |
| |
| Affiliation: | 1.Department of Materials and Chemistry Engineering/a>;Heilongjiang Institute of Technology/a>;Harbin 150050/a>;China/a>;2.Mudanjiang Medical College/a>;Mudanjiang 157009/a>;China |
| |
| Abstract: | In order to improve the properties of electroless composite coating,the Ni-P-(SiC)P electroless composite coating added nano-(SiC)P was prepared and various parameters on the Ni-P-nano-(SiC)P coating were studied systematically.The corresponding mechanism was analyzed and the heat-treatment of coating was also compared.The experimental results show that: main salt,reducing agent,temperature,pH,stirring speed and(SiC)P amount of Ni-P-(SiC)P coating deposition and deposition rate had greater influence.It was ... |
| |
| Keywords: | (SiC)P |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
