| 双电极焊条单弧焊焊缝组织与性能研究 |
| |
| 引用本文： | 李立英,邹增大,韩彬. 双电极焊条单弧焊焊缝组织与性能研究[J]. 焊管, 2010, 33(7): 17-20 |
| |
| 作者姓名： | 李立英 邹增大 韩彬 |
| |
| 作者单位： | 1. 中国石油大学(华东)机电工程学院,山东东营,257061
2. 山东大学材料科学与工程学院,济南,250061 |
| |
| 摘 要： | 首先分析了双电极焊条单弧焊焊接电流对焊缝成形的影响,利用扫描电镜对接头微观组织进行了观察。其次对熔敷金属的化学成分及力学性能进行了测定。最后对断口形貌以及夹杂物成分进行了分析。结果表明,焊接电流在180~220 A之间焊缝成形最佳,接头从焊缝到母材由珠光体和铁素体组成的粗大柱状晶组织、过热粗晶区魏氏组织、细晶区铁素体和珠光体组织、母材组织等一系列梯状组织组成,熔敷金属的化学成分和力学性能均在标准要求的范围内,焊接接头的强度高于母材,呈韧窝断裂。
|
| 关 键 词： | 双电极焊条 单弧焊 微观组织 力学性能 |
Study on Microstructure and Properties of Twin-electrode Single Arc Welding |
| |
| LI Li-ying,ZOU Zeng-da,HAN Bin. Study on Microstructure and Properties of Twin-electrode Single Arc Welding[J]. Welded Pipe and Tube, 2010, 33(7): 17-20 |
| |
| Authors: | LI Li-ying ZOU Zeng-da HAN Bin |
| |
| Affiliation: | 1.College of Mechanical and Electronic Engineering,China University of Petroleum,Dongying 257261,Shandong,China;2.School of Materials Science and Engineering,Shandong University,Jinan 250061,China) |
| |
| Abstract: | Firstly,the effect of welding current on weld appearance was discussed,and the microstructure of welded joint has been observed by means of SEM.Secondly,composition and mechanical properties of the deposited metal were measured.Finally,fracture morphology and the composition of inclusions were analyzed.The results indicated that the welded joint has well appearance when the welding current was from 180 to 220A,and the microstructure from the weld bead to heat affected zone was composed of a series of ladder-shaped microstructure including columnar,coarse-grained and fine-grained,base metal.In addition,the composition and mechanical properties of the deposited were in the standard scan,the tensile strength of welded joint was higher than that of the base metal,and the rupture was ductility. |
| |
| Keywords: | twin electrode single arc welding microstructure mechanical properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
