首页 | 本学科首页   官方微博 | 高级检索  
     

铌对高强钢焊接热影响区中马氏体-奥氏体组元形态的影响
引用本文:荆洪阳,霍立兴,张玉凤.铌对高强钢焊接热影响区中马氏体-奥氏体组元形态的影响[J].焊接学报,1997,18(1):37-42.
作者姓名:荆洪阳  霍立兴  张玉凤
作者单位:天津大学
基金项目:国家教委优秀青年教师资助
摘    要:对铌含量不同的五种钢材进行焊接热循环模拟焊接热影响区粗晶区,研究Nb含量对粗晶区中MA组元的形态和粗晶区韧性的影响。结果表明,降低钢材的Nb含量能够减少细长MA组元的含有率,从而控制CGHAZ的韧性,因此,进行实际钢材化学成分设计时,在满足强度要求的条件下,应尽量降低Nb的含量。

关 键 词:高强度钢  马氏体  奥氏体  组元形态    焊接
收稿时间:1996/4/5 0:00:00
修稿时间:1996/11/28 0:00:00

Effect of Niobium on Mophology of Martensite-austenite Constituents in Weld HAZ
Jing Hongyang,Huo Lixing and Zhang Yufeng.Effect of Niobium on Mophology of Martensite-austenite Constituents in Weld HAZ[J].Transactions of The China Welding Institution,1997,18(1):37-42.
Authors:Jing Hongyang  Huo Lixing and Zhang Yufeng
Affiliation:Tianjin University
Abstract:Influence of niobium content on the morphology of the martensite-austenite(MA) constituents in the coarse grained heat affected zone (CGHAZ) of weld and the toughness of CGHAZ was studied by simulating CGHAZ of five kinds of high strength steels with different niobium content. The results show that the volume fraction of the slender M-A constituents reduced with the decrease in niobuim content,thus the toughness of CGHAZ could be controled.As a result,niobium content should be reduced during the chemical composition design for high strength steel if the strength was satisfied.
Keywords:coarse grained HAZ  chemical composition design  morphology of MA constituent
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号