| 刺辊变频调速控制系统的设计与分析 |
| |
| 引用本文： | 赵业平,关宏强,肖枫,王世夫,韩贤国,张宝刚. 刺辊变频调速控制系统的设计与分析[J]. 辽东学院学报(自然科学版), 2012, 19(2): 98-100,114 |
| |
| 作者姓名： | 赵业平 关宏强 肖枫 王世夫 韩贤国 张宝刚 |
| |
| 作者单位： | 辽东学院机电学院,辽宁丹东,118003;辽东学院网管中心,辽宁丹东,118003;江苏科技大学电子信息学院,江苏镇江,212003;北方重工集团有限公司,沈阳,110819 |
| |
| 基金项目： | 辽宁省教育厅科研计划项目,丹东市科技计划项目,辽宁省科技厅项目 |
| |
| 摘 要： | 梳棉机刺辊转速通常是由梳棉机的主轴电动机通过皮带传动的方式进行控制,利用更换不同直径的皮带轮得到多种传动比来实现刺辊的转速调整。文章通过对刺辊加装独立电动机驱动,利用PLC控制和变频调速技术来实现刺辊转速的调整,以适应不同梳棉刺辊速度的调整要求。改装后的刺辊转速的变频调速,可满足对刺辊的多级或无级连续的速度调整需要。
|
| 关 键 词： | 梳棉机 刺辊 PLC 变频调速 |
Design and Analysis of Taker -In Speed Control System by Frequency Conversion Technology |
| |
| ZHAO Ye-ping,GUAN Hong-qiang,XIAO Feng,WANG Shi-fu,HAN Xian-guo,ZHANG Bao-gang. Design and Analysis of Taker -In Speed Control System by Frequency Conversion Technology[J]. Journal of Liaodong University(Natural Sciences), 2012, 19(2): 98-100,114 |
| |
| Authors: | ZHAO Ye-ping GUAN Hong-qiang XIAO Feng WANG Shi-fu HAN Xian-guo ZHANG Bao-gang |
| |
| Affiliation: | 1.College of Mechanical and Electrical Engineering,Eastern Liaoning University,Dandong 118003,China; 2.Network Management Center,Eastern Liaoning University,Dandong 118003,China; 3.College of Electronic Information,Jiangsu University of Science and Technology,Zhenjiang 212013,China; 4.Northern Heavy Industries Group Co.Ltd,Shenyang 110819,China) |
| |
| Abstract: | The rotational speed of taker-in is usually adjusted by a belt drive transmission system with a spindle drive motor in carding machine.By replacing belt wheel with different diameters,variable ratios of the belt wheel couple can be obtained,thereby the rotational speed of the take-in can be adjusted.In this study,a separate drive motor to regulate the speed of the taker-in with PLC control and frequency conversion technology.This device can meet the demand for multilevel or continuously variable transmission for the taker-in speed. |
| |
| Keywords: | carding machine taker- in PLC speed control by frequency conversion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
