| 带有边缘径向裂纹的固支圆板湿模态分析 |
| |
| 引用本文： | 佀晓辉,卢文秀,褚福磊.带有边缘径向裂纹的固支圆板湿模态分析[J].振动工程学报,2011,24(6). |
| |
| 作者姓名： | 佀晓辉 卢文秀 褚福磊 |
| |
| 作者单位： | 清华大学精密仪器与机械学系,北京,100084 |
| |
| 基金项目： | 国家杰出青年科学基金资助项目(50425516); 国家自然科学基金资助项目(10702031) |
| |
| 摘 要： | 基于Rayleigh-Ritz法,分析了置于无限大障板中、单面临水、带有边缘径向裂纹的固支圆板的固有频率和振型.引入角函数对裂纹的影响进行描述,采用薄板假设计算裂纹深度等于板半径的边缘径向裂纹圆板振动的最大动能和最大势能；在无旋、无粘、不可压和板微幅振动的假设条件下,采用速度势描述水体运动并获得了由位移基函数表达的附加动能,并通过Rayleigh-Ritz过程获得流固耦合振动系统的特征矩阵,进而求得湿模态对应的固有频率和振型.结果表明,固有频率降低率整体上随模态阶数的增大而减小,而干、湿模态振型的差别则整体上随模态阶数的增大而增大；水体对对称模态和反对称模态的影响有明显的区别.计算结果与ANSYS数值仿真的结果符合的较好.
|
| 关 键 词： | 流固耦合 裂纹 固支圆板 自由振动 Rayleigh-Ritz |
| 收稿时间： | 2011/4/28 0:00:00 |
| 修稿时间： | 2011/7/21 0:00:00 |
Wet mode analysis of completely clamped circular plate with a side radial crack |
| |
| SI Xiao-hui
,
LU Wen-xiu
,
CHU Fu-lei.Wet mode analysis of completely clamped circular plate with a side radial crack[J].Journal of Vibration Engineering,2011,24(6). |
| |
| Authors: | SI Xiao-hui LU Wen-xiu CHU Fu-lei |
| |
| Affiliation: | SI Xiao-hui,LU Wen-xiu,CHU Fu-lei(Department of Precision Instruments and Mechanology,Tsinghua University,Beijing 100084,China) |
| |
| Abstract: | In this paper,the free vibration of a completely clamped circular plate with a side crack and in contact with water on one side is investigated based on the Rayleigh-Ritz method.The plate is located at a hole of an infinite baffle and the crack whose depth is equal to the radius of the plate develops along the radial direction.First,the corner functions are introduced to describe the behavior of the cracks,and the Kirchhoff hypothesis is used during the calculation of the maximum strain energy and kinetic e... |
| |
| Keywords: | fluid-structure interaction crack completely clamped circular plate free vibration Rayleigh-Ritz |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《振动工程学报》浏览原始摘要信息 |
|
点击此处可从《振动工程学报》下载全文 |
|
