首页 | 本学科首页   官方微博 | 高级检索  
     

LiNbO3 1×2非对称电极Y分叉数字光开关的研究
引用本文:肖彩侠,李锡华,周强,杨健义,江晓清,王明华.LiNbO3 1×2非对称电极Y分叉数字光开关的研究[J].光通信研究,2007,33(5):50-52.
作者姓名:肖彩侠  李锡华  周强  杨健义  江晓清  王明华
作者单位:浙江大学信息学院,浙江杭州310027
基金项目:浙江省自然科学基金资助项目(Y105088)
摘    要:文章提出一种关于非对称电极低串扰数字光开关的新型设计方案,在Y分叉后端引入S弯曲波导,通过在Y分叉处的非对称电极和弯曲波导的弯曲电极处施加一定的同步电压,实现了比没有S弯曲的开关更低的串扰。此种设计采用有限差分光束传播方法(FDBPM)来分析,模拟结果显示,在光波长为1.55μm时,开关电压8V.串扰〈-25dB。

关 键 词:数字光开关  非对称电极  S弯曲波导  铌酸锂
文章编号:1005-8788(2007)05-0050-03
收稿时间:2007/5/21
修稿时间:2007-05-21

Study on LiNbO3 1×2 asymmetrical electrode Y branch digital optical switch
Xiao Caixia, Li Xihua, Zhou Qiang, Yang Jiangyi, Jiang Xiaoqing, Wang Minghua.Study on LiNbO3 1×2 asymmetrical electrode Y branch digital optical switch[J].Study on Optical Communications,2007,33(5):50-52.
Authors:Xiao Caixia  Li Xihua  Zhou Qiang  Yang Jiangyi  Jiang Xiaoqing  Wang Minghua
Affiliation:College of Information Science and Engineering, Zhejiang University, Hangzhou 310027, China
Abstract:A novel design scheme for digital optical switch with high extinction ratio by employing S curve waveguide at the end of the Y branch is proposed. Higher extinction ratio than that of the device without S curve waveguide is obtained by applying certain synchronous voltage to the Y branch and the curve electrode of the S curve waveguide. Finite Difference Beam Propagation Method (FDBPM) is used to simulate the performance of the design, and the results show that the extinction ratio can exceed -25 dB with the switch voltage of about 8 V at 1.55 μm.
Keywords:Digital Optical Switch(DOS)  asymmetrical electrode  S curve waveguide  Lithium niobate
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号