| 镁合金压室模拟工艺参数优化 |
| |
| 引用本文： | 刘正,霍成鹏,毛萍莉,周乐. 镁合金压室模拟工艺参数优化[J]. 铸造, 2011, 60(11) |
| |
| 作者姓名： | 刘正 霍成鹏 毛萍莉 周乐 |
| |
| 作者单位： | 沈阳工业大学材料科学与工程学院,辽宁沈阳,110870 |
| |
| 摘 要： | 压铸件产生的缺陷除了在凝固收缩的过程中容易出现,在冷室压铸机压射时,慢压射选取速度不当也是造成铸件缺陷的一个重要原因.通过对镁合金转向管柱支架的慢压射过程进行理论分析和计算机模拟辅助优化,得出加速度为0.6 m/s2、慢压射速度为0.4 m/s情况下,压射速度较为合理.能缩短生产周期,提高效率.
|
| 关 键 词： | 镁合金 压铸 慢压射 数值模拟 |
Optimization of Simulation Process Parameters for Magnesium Alloy Casting Chamber |
| |
| LIU Zheng,HUO Cheng-peng,MAO Ping-li,ZHOU Le. Optimization of Simulation Process Parameters for Magnesium Alloy Casting Chamber[J]. China Foundry, 2011, 60(11) |
| |
| Authors: | LIU Zheng HUO Cheng-peng MAO Ping-li ZHOU Le |
| |
| Affiliation: | LIU Zheng,HUO Cheng-peng,MAO Ping-li,ZHOU Le(Department of Materials,Shenyang University of technology,Shenyang 110870,Liaoning,China) |
| |
| Abstract: | Casting defects are usually caused by unsuitable choosing of slow injection speed of the cold chamber in die casting process,except the defects caused by solidification shrinkage.Based on the theoretical analysis of the slow injection process for magnesium alloy steering column bracket and the optimization of computer-assisted simulation,it is concluded that the injection rate,with an acceleration of 0.6 m/s2 and an injection speed of 0.4 m/s,is more reasonable.This injection rate contributes to the reducti... |
| |
| Keywords: | magnesium alloy die casting slow shot phase numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
