| 旋转式倒立摆计算机控制系统 |
| |
| 引用本文： | 程俊,王永,黄南晨,吴刚,卿志远,孙德敏. 旋转式倒立摆计算机控制系统[J]. 电机与控制学报, 2001, 5(4): 277-280 |
| |
| 作者姓名： | 程俊 王永 黄南晨 吴刚 卿志远 孙德敏 |
| |
| 作者单位： | 中国科学技术大学自动化系, |
| |
| 摘 要： | 研究了一种新型的倒立摆系统，该装置是由连在直流力矩电机转轴上的驱动臂和能自由旋转的摆杆构成，驱动臂在电机的作用下能在垂直平面内旋转，能过驱动臂的转动来保持摆杆稳定在平衡位置，运用动力学原理建立了该系统的数学模型，在此基础上借助于计算机辅助设计软件，进行了仿真研究，设计出控制律，最后实现旋转式倒立摆计算机控制。
|
| 关 键 词： | 旋转式倒立摆 状态反馈 实时控制 计算机控制系统 |
| 文章编号： | 1007-449X(2001)04-0277-04 |
| 修稿时间： | 2001-03-20 |
A computer control system for arm-driven inverted pendulum |
| |
| CHENG Jun,WANG Yong,HUANG Nan-chen,WU Gang,QING Zhi-yuan,SUN De-min. A computer control system for arm-driven inverted pendulum[J]. Electric Machines and Control, 2001, 5(4): 277-280 |
| |
| Authors: | CHENG Jun WANG Yong HUANG Nan-chen WU Gang QING Zhi-yuan SUN De-min |
| |
| Abstract: | In this paper a new arm-driven inverted pendulum (ADIP) is presented. Thedevice is made up of a pendulum and a rotated arm. The pendulum is the top link and is driven by the rotated arm, which is connected to a motor. The pendulum and the rotated arm can rotate in vertical plane. The mathematical model is established and linearized at its balanced points, then a state feedback controller is designed using continuous system's pole arranging. The simulation of the controller is acquired under the environment of MATLAB SIMULINK. At last, real time control of ADIP is accomplished. |
| |
| Keywords: | arm-driven inverted pendulum state feedback real-time control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
