| CCDZ50型转向架轴箱铸造工艺模拟 |
| |
| 引用本文： | 胡瑞生,张励忠,覃彦龙,肖黎明. CCDZ50型转向架轴箱铸造工艺模拟[J]. 铸造, 2008, 57(2): 154-156 |
| |
| 作者姓名： | 胡瑞生 张励忠 覃彦龙 肖黎明 |
| |
| 作者单位： | 北京交通大学机械与电子控制工程学院,北京,100044 |
| |
| 摘 要： | 按照传统的铸造工艺设计方法初步确定出轴箱的铸造工艺方案，然后利用铸造模拟软件ProCAST对轴箱的充型、凝固过程的流场和温度场进行了模拟。通过计算机模拟得到了优化的轴箱铸造工艺方案，消除了缩孔、缩松缺陷。
|
| 关 键 词： | 轴箱 铸造 数值模拟 ProCAST 转向架轴箱 铸造工艺模拟 Type Process Simulation 缩松缺陷 缩孔 优化 计算机模拟 流场和温度场 凝固过程 ProCAST 模拟软件 利用 铸造工艺方案 设计方法 |
| 文章编号： | 1001-4977（2008）02-0154-03 |
| 收稿时间： | 2007-05-17 |
| 修稿时间： | 2007-06-19 |
Casting Process Simulation of CCDZ50 Type Bogie's Axle Box |
| |
| HU Rui-sheng,ZHANG Li-zhong,TAN Yan-long,XIAO Li-ming. Casting Process Simulation of CCDZ50 Type Bogie's Axle Box[J]. Foundry, 2008, 57(2): 154-156 |
| |
| Authors: | HU Rui-sheng ZHANG Li-zhong TAN Yan-long XIAO Li-ming |
| |
| Abstract: | On the basis of traditional casting technology, the casting process of the axle box was determined. The filling of axle box, and temperature fields and flow fields during solidification were simulated by using cast software ProCAST. The shrinkage and the porosity were eliminated, and the casting process of the axle box was optimized depending on computer simulation. |
| |
| Keywords: | axle box casting numerical simulation ProCAST |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
