首页 | 本学科首页   官方微博 | 高级检索  
     

基于Buck-Boost变换器的T-S模糊建模和仿真研究
引用本文:王艳,吴正成,纪志成. 基于Buck-Boost变换器的T-S模糊建模和仿真研究[J]. 计算机与应用化学, 2008, 25(7)
作者姓名:王艳  吴正成  纪志成
作者单位:江南大学电气自动化研究所,江苏,无锡,214122;江南大学电气自动化研究所,江苏,无锡,214122;江南大学电气自动化研究所,江苏,无锡,214122
基金项目:国家自然科学基金,江南大学创新团队发展计划
摘    要:根据Buck-Booat变换器的工作原理及其非线性特征,在电感电流连续导通模式和断续导通模式下,分别对Buck-Boost 电路构建T-S模糊模型,在断续导通模式下,引入切换函数,统一了两种模式下电路状态方程和T-S模糊模型.仿真结果表明,Buck-Boost变换器经T-S建模后,输出电压平均值和电感电流的平均值的误差均在2%以内,符合实际应用的要求.T-S模糊建模的有效性和可行性得到验证.

关 键 词:Buck-Boost变换  T-S模糊系统  连续导通模式  断续导通模式  仿真

T-S fuzzy modeling and simulation of Buck-Boost converter
Wang Yan,Wu Zhengcheng,Ji Zhicheng. T-S fuzzy modeling and simulation of Buck-Boost converter[J]. Computers and Applied Chemistry, 2008, 25(7)
Authors:Wang Yan  Wu Zhengcheng  Ji Zhicheng
Abstract:According to the basic principle and the non-linear characteristic of the Buck-Boost converter,this paper separately con- structs the T-S fuzzy model of the Buck-Boost electric circuit under two patterns which are CCM and DCM.In order to uniform the cir- cuit state equation and T-S fuzzy model under these two patterns,this paper introduces the switching function in DCM.The average output voltage and the average inductor current errors of the Buck-Boost converter in T-S fuzzy model are within 2%,in line with the actual application requirements.The effectiveness and feasibility of T-S fuzzy modeling is verified.
Keywords:Buck-Boost converter  T-S modeling  CCM  DCM  simulation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号