| 异形销孔加工及控制方法研究 |
| |
| 引用本文： | 张凯,胡德金,杨亚川.异形销孔加工及控制方法研究[J].机械设计与研究,2004,20(1):58-59. |
| |
| 作者姓名： | 张凯 胡德金 杨亚川 |
| |
| 作者单位： | 上海交通大学,机械与动力工程学院,上海,200030 |
| |
| 基金项目： | 国家自然科学基金资助项目 (5 0 175 0 72 ) |
| |
| 摘 要： | 简述了采用活塞异形销孔的必要性及其结构特点。提出一种新型活塞异形销孔数控加工方法，该方法采用一个基于压电陶瓷驱动的柔性铰链机构来实现镗刀的径向微位移。分析了柔性铰链加工误差对镗杆微位移误差的影响，着重讨论了压电陶瓷驱动器磁滞现象的消除方法。结果表明压电陶瓷驱动的柔性铰链微动机构能够满足异形销孔的加工要求。
|
| 关 键 词： | 活塞 异形销孔 柔性铰链 压电驱动 孔加工 数控加工 镗刀 |
| 文章编号： | 1006-2343(2004)01-058-02 |
| 修稿时间： | 2003年6月30日 |
Study on Boring Mechanism and Control Method for Piston Noncircular Pin Hole |
| |
| ZHANG Kai HU De-jin YANG Ya-chuan.Study on Boring Mechanism and Control Method for Piston Noncircular Pin Hole[J].Machine Design and Research,2004,20(1):58-59. |
| |
| Authors: | ZHANG Kai HU De-jin YANG Ya-chuan |
| |
| Abstract: | The paper analyses the necessity for piston in modern auto to adopt noncircular pin hole.The paper presents a new way for piston noncircular pin hole boring which uses a piezodriven displacement mechanism through a flexible hinge.The working principle of the mechanism has been analyzed. In order to obtain the desired micro displacement of boring bar,the piezo actuator is mounted radially in the middle of the rotating bar of the mechanism.The control method of the mechanism for noncircular hole boring and the effect of machining error of flexible hinge have all been discussed. The result shows that the mechanism is suitable for noncircular pin hole boring. |
| |
| Keywords: | piston noncircular pin hole flexible hinge piezodriven |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
