首页 | 本学科首页   官方微博 | 高级检索  
     

TiN及WC加入量对Ti(C,N)基金属陶瓷组织与性能的影响
引用本文:刘宁 周凤云. TiN及WC加入量对Ti(C,N)基金属陶瓷组织与性能的影响[J]. 硬质合金, 1994, 11(1): 13-17
作者姓名:刘宁 周凤云
作者单位:华中理工大学(刘宁,刘灿楼,赵兴中,周凤云,胡镇华,崔昆),宁波机电设备公司(徐文斌)
摘    要:本文研究了TiN及WC加入量对金属陶瓷组织和性能的影响.结果表明,随TiN加入量的增加,组织细化,WC形成TiC-WC固溶体的临界加入量约为15%,超过15%时将使部分WC以针状或针片状形式存在,使硬度降低.

关 键 词:TiN及WC含量  金属陶瓷  组织和性能

THE INFLUENCE OF THE ADDING CONTENTS OF TIN AND WC ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TI(C. N) BASED CERMETS
LIU Ning, Liu Canlou, ZHAo Xingahong, ZHOU Fengyun, HU Zhenhua, CUI Kun. THE INFLUENCE OF THE ADDING CONTENTS OF TIN AND WC ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TI(C. N) BASED CERMETS[J]. Cemented Carbide, 1994, 11(1): 13-17
Authors:LIU Ning   Liu Canlou   ZHAo Xingahong   ZHOU Fengyun   HU Zhenhua   CUI Kun
Affiliation:LIU Ning; Liu Canlou; ZHAo Xingahong; ZHOU Fengyun; HU Zhenhua; CUI Kun(Huazhong University of Science and Technolgy)XU Wenbing(Ningbo Menchanical and Electrical Eguipment Corporation)
Abstract:The influence of the adding contents of TiN and WC on the microstructure and mechanical properties of Ti(c,N)based cermets bas been studied in the paper. The experimental results have shown that the microstructure becomes finer with the increase in adding contents of TiN. The critical adding coutents of WC is about 15 percent ln which case WC can dissolve into the TiN to form the solid solution of TiC-WC. If the adding content is more than 15 percent, parts of the adding WC particles will remain in the matrix in the form of needle or slice,hence decrease the bardness of cermets.
Keywords:contentts of TiN and WC   cermets   microstructure and mechanical properties  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号