| 侧向与斜向二次抽芯注射模设计 |
| |
| 引用本文： | 黄力. 侧向与斜向二次抽芯注射模设计[J]. 模具工业, 2011, 37(7): 47-49 |
| |
| 作者姓名： | 黄力 |
| |
| 作者单位： | 贵州电子信息职业技术学院,贵州凯里,556000 |
| |
| 摘 要： | 根据斜导柱抽芯结构的基本原理,介绍利用斜导柱完成零件侧面不同方向的二次抽芯及在模具设计制造时应注意的关键问题,模具结构简单、紧凑,制造方便,使用效果良好。
|
| 关 键 词： | 风轮 斜向抽芯 注射模 |
Design of injection mould with two-step side & angle core-pulling |
| |
| HUANG Li. Design of injection mould with two-step side & angle core-pulling[J]. Die & Mould Industry, 2011, 37(7): 47-49 |
| |
| Authors: | HUANG Li |
| |
| Affiliation: | HUANG Li(Guizhou Vocational Technology College of Electronics & Information,Kaili,Guizhou 556000,China) |
| |
| Abstract: | Some key points in designing and manufacturing an injection mould with slanted guide pillar for two-step core-pulling from the side of the product at different directions were presented.The application is based on the basic principle of core-pulling by slanted guide pillar and has a good effect. |
| |
| Keywords: | wind rotor angle core-pulling injection mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
