| 基于近似熵铝合金脉冲MIG焊过程稳定性分析 |
| |
| 引用本文： | 黄健康,石玗,聂晶,樊丁.基于近似熵铝合金脉冲MIG焊过程稳定性分析[J].焊接学报,2010,31(1):101-104. |
| |
| 作者姓名： | 黄健康 石玗 聂晶 樊丁 |
| |
| 作者单位： | 1. 兰州理工大学甘肃省有色金属新材料重点试验室,兰州,730050
2. 兰州理工大学有色金属合金及加工教育部重点试验室,兰州,730050 |
| |
| 基金项目： | 国家自然科学基金项目(50675093);;甘肃省教育厅基金资助项目(0803-02) |
| |
| 摘 要： | 为确定铝合金脉冲MIG(P-MIG)焊过程稳定性,根据近似熵的理论,对铝合金脉冲MIG焊中的电压信号进行近似熵分析,通过对不同焊接速度、送丝速度与占空比的焊接工艺参数下的电压信号近似熵的计算与比较.结果表明,利用电弧电压信号的近似熵分析可以衡量铝合金脉冲MIG焊接过程稳定性,平均近似熵值小,标准方差小,其焊接过程比较稳定;平均近似熵值大,标准方差大,其焊接过程不稳定.
|
| 关 键 词： | 脉冲MIG过程 近似熵 工艺参数 稳定性 |
| 收稿时间： | 2008/9/9 0:00:00 |
Analysis on welding stability of aluminum alloy pulse MIG welding based on approximate entropy |
| |
| HUANG Jiankang,SHI Yu,NIE Jing and FAN Ding.Analysis on welding stability of aluminum alloy pulse MIG welding based on approximate entropy[J].Transactions of The China Welding Institution,2010,31(1):101-104. |
| |
| Authors: | HUANG Jiankang SHI Yu NIE Jing and FAN Ding |
| |
| Affiliation: | 1.State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials;Lanzhou University of Technology;Lanzhou 730050;China;2.Key Laboratory of Non-ferrous Metal Alloys and Processing;The ministry of Education;China |
| |
| Abstract: | In order to evaluate the stability of aluminum alloy pulsed MIG welding,an approximate analysis has been done on voltage signal in the process of aluminum alloy pulsed MIG welding.The calculation and comparison of the approximate entropy on voltage signal under different welding procedures such as welding speeds,wire feed rate,duty cycle and so on,show that,the approximate entropy of voltage can reflect the stability of the process of aluminum alloy pulsed MIG welding.The results show that,the smaller the a... |
| |
| Keywords: | pulse MIG approximate entropy parameters stability |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
