| Z3CN20-09M铸造奥氏体不锈钢的形变与断裂机制 |
| |
| 引用本文： | 王正品,邓薇,刘江南,石崇哲,金耀华. Z3CN20-09M铸造奥氏体不锈钢的形变与断裂机制[J]. 西安工业大学学报, 2011, 0(2): 136-140 |
| |
| 作者姓名： | 王正品 邓薇 刘江南 石崇哲 金耀华 |
| |
| 作者单位： | 西安工业大学材料与化工学院,西安710032 |
| |
| 基金项目： | 陕西省自然科学基金资助项目（2010JM6005） |
| |
| 摘 要： | 为研究Z3CN20-09M铸造奥氏体钢的形变与断裂过程,利用微型拉伸夹具对铸造奥氏体不锈钢在金相显微镜和扫描电镜下进行了动态拉伸和微观形貌原位观察.试验结果表明,在拉伸形变初期奥氏体中先出现滑移线,滑移线与铁素体的分布形态平行或是近乎平行;随着载荷的增大,奥氏体变形加剧且铁素体中开始出现粗而间距大滑移线.在拉伸形变后期,裂纹首先在杂质和奥氏体与铁素体相界处萌生,并向铁素体相扩展.
|
| 关 键 词： | 奥氏体不锈钢 形变 裂纹萌生 滑移线 动态拉伸 |
Deformation and Fracture Mechanism of Z3CN20-09 Casting Austenitic Stainless Steels |
| |
| WANG Zheng-pin,DENG Wei,LIU Jiang-nan,SHI Chong-zhe,JIN Yao-hua. Deformation and Fracture Mechanism of Z3CN20-09 Casting Austenitic Stainless Steels[J]. Journal of Xi'an Institute of Technology, 2011, 0(2): 136-140 |
| |
| Authors: | WANG Zheng-pin DENG Wei LIU Jiang-nan SHI Chong-zhe JIN Yao-hua |
| |
| Affiliation: | (School of Materials and Chemical Engineering,Xi＇an Technological University,Xi＇an 710032,China) |
| |
| Abstract: | In order to research the deformation and fracture process of Z3CN20-09M casting austenitic stainless steels,the dynamic tensile test was conducted by using the miniature tensile device and the deformation process was in-situ observed with OM and SEM.The results showed that the slip lines appeared first in austenite at first and were parallel to or approximately parallel to ferrite.With the increment of the tensile load,the deformation of austenite phase aggravated and the wide glide lines with large space appeared in ferrite.With dynamic tensile test,crack initiated in the second phase particles or the interfacial place,and then propagated into the ferrite. |
| |
| Keywords: | austenitic stainless steel deformation crack initiation slip line dynamic tensile |
| 本文献已被 维普 等数据库收录！ |
|
