首页 | 本学科首页   官方微博 | 高级检索  
     

粘钢加固结构钢板粘贴质量的检测新方法
引用本文:黄文浩,艾军,田裕鹏,周克印,董军.粘钢加固结构钢板粘贴质量的检测新方法[J].建筑技术,2006,37(6):465-467.
作者姓名:黄文浩  艾军  田裕鹏  周克印  董军
作者单位:南京航空航天大学,210016,南京;南京工业大学,210016,南京
摘    要:研究采用红外热成像法对粘钢加固结构粘贴质量进行测试的技术,结果表明,红外热成像法能直观检测出钢板粘贴缺陷且结果可靠;与敲击法和目测法相比,红外热成像法对位置高、距离远的钢板粘贴质量的检测更方便、有效.

关 键 词:红外热成像法  粘钢结构  无损检测
文章编号:1000-4726(2006)06-0465-03
收稿时间:2006-02-18
修稿时间:2006-02-18

A NEW METHOD TO TEST BONDED QUALITY OF STRENGTHENED STRUCTURE OF BONDED STEEL PLATES
HUANG Wenhao,AI Jun,TIAN Yupeng,ZHOU Keyin,DONG Jun.A NEW METHOD TO TEST BONDED QUALITY OF STRENGTHENED STRUCTURE OF BONDED STEEL PLATES[J].Architecture Technology,2006,37(6):465-467.
Authors:HUANG Wenhao  AI Jun  TIAN Yupeng  ZHOU Keyin  DONG Jun
Affiliation:1.Nanjing University of Aeronautics and Astronautics,210016,Nanjing,China;2.Nanjing University of Technology,210016,Nanjing,China
Abstract:The research focuses on applying infrared thermography to test the bonding quality of strengthened structure with externally bonded steel plates.Self-reserved thermal and exterior cooling methods are respectively used to produce the test temperature distribution,and analyze the procedures of heat conduction under each of the two circumstances.The influence of internal defects of the reinforced concrete structure of externally bonded steel plates on the exterior temperature of the steel plate is researched.The results show that infrared thermography can directly examine the defects in bonded steel plates reliably.In contrast to 'tap' test and visual inspection,infrared thermography is more convenient and effective for testing the bonding quality of steel plates at high and far locations.
Keywords:infrared thermography  bonded steel structure  nondestructive test
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号