| UG二次开发技术在铸件毛坯三维实体自动生成中的应用 |
| |
| 引用本文： | 龙军,张世富,朱朝宽,张涛,孙新岭. UG二次开发技术在铸件毛坯三维实体自动生成中的应用[J]. 铸造, 2007, 56(2): 155-157 |
| |
| 作者姓名： | 龙军 张世富 朱朝宽 张涛 孙新岭 |
| |
| 作者单位： | 1. 后勤工程学院军事供油工程系,重庆,400016
2. 重庆工商大学机械工程学院,重庆,400033 |
| |
| 摘 要： | 利用三维实体造型软件的参数化设计思想,在UGNX环境中,通过对零件实体图的尺寸、结构、加工要求等信息的读取,经过二次开发程序的分析后,自动形成铸件的毛坯三维实体图,为在三维环境下的冷加工工装设计提供重要的依据,并能快捷地转换成铸件毛坯图和铸造工艺图。
|
| 关 键 词： | 三维实体造型 参数化设计 铸件毛坯 二次开发 |
| 文章编号： | 1001-4977(2007)02-0155-03 |
| 修稿时间： | 2006-10-10 |
Application of UG''''s Second Development Technology in the Automatically Forming the 3D Solid Molding of Roughcast |
| |
| LONG Jun,ZHANG Shi-fu,ZHU Chao-kuan,ZHANG Tao,SUN Xing-ling. Application of UG''''s Second Development Technology in the Automatically Forming the 3D Solid Molding of Roughcast[J]. Foundry, 2007, 56(2): 155-157 |
| |
| Authors: | LONG Jun ZHANG Shi-fu ZHU Chao-kuan ZHANG Tao SUN Xing-ling |
| |
| Affiliation: | 1. Department of Petroleum Supply Engineering, Logistical Engineering University, Chongqing, 40016, China; 2. Department of Mechanics, Chongqing Technology and Business University, Chongqing 400033, China |
| |
| Abstract: | According to the idea of the parametric design in 3D solid molding software, The information of the parts' dimension, configuration and the requirement of manufacture should be input the computer, then analyzed by the second exploitive software. At last, The system exports the 3D solid molding draft. It can provide important evidences to frock in cold machining, At the same time, the casting rough draft and craft draft could be exported. |
| |
| Keywords: | Unigraphics NX |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
