PX氧化反应器优化运行探讨 |
| |
引用本文: | 邢建良. PX氧化反应器优化运行探讨[J]. 聚酯工业, 2000, 13(4): 27-31 |
| |
作者姓名: | 邢建良 |
| |
摘 要: | 分析影响PX氧化反应的因素 ,提出本装置在不同生产负荷下的优化运行参数。指出 ,在高负荷 90 0~ 10 0 0t/d下 ,温度 193~ 195℃ ,压力 1 5 5~ 1 60MPa ,溶剂比 3 8~ 4 1,钴、PX、HAc、H2 O的质量分数 (% )分别为 0 0 2 3~ 0 0 2 5 ,19 5~ 2 1 0 ,71~ 73 ,7~ 8及Mn∶Co为 1 5~ 2 0是最佳。
|
关 键 词: | PTA PX反应器 工艺参数 优化 |
Study on optimizing operation of PX oxidation reactor |
| |
Abstract: | The factors influence on PX oxidation reaction were analysed and the optimizing operation parameters under different reaction load in this unit were put forward. It was pointed out that when high load is 900~1000 t/d,temperature is 193~195℃,pressure is 1.55~1.60 MPa,the solvent ration is 3.8~4.1, the mass fraction of Co,PX,HAc and H-2O separately is 0.023~0.025,19.5~21.0,71~73,7~8 and Mn/Co is 1.5~2.0.The operation condition is optimum under this condition. |
| |
Keywords: | PTA PX reactor process parameter optimizi? |
本文献已被 维普 等数据库收录! |
|