首页 | 本学科首页   官方微博 | 高级检索  
     

InSb阳极氧化膜界面特性研究
引用本文:余黎静, 李延东, 信思树, 郭雨航, 杨文运. InSb阳极氧化膜界面特性研究[J]. 红外技术, 2012, 34(4): 191-195. DOI: 10.3969/j.issn.1001-8891.2012.04.002
作者姓名:余黎静  李延东  信思树  郭雨航  杨文运
作者单位:昆明物理研究所,云南 昆明,650223
摘    要:用阳极氧化的方法在InSb衬底上生长氧化膜,并在阳极氧化膜上镀Cr/Au电极以制备MOS器件,通过分析77 K时MOS器件C-V特性,得出InSb-阳极氧化膜界面的掺杂浓度、界面态密度,氧化层中的固定电荷密度可动电荷密度等重要参数,分析其界面特性和制备工艺的关系,为InSb表面的钝化工艺提供参考.

关 键 词:阳极氧化  MIS器件  C-V特性  界面态密度
收稿时间:2012-03-14

Interface Properties of Anodized InSb
YU Li-jing, LI Yan-dong, XIN Si-shu, GUO Yu-hang, YANG Wen-yun. Interface Properties of Anodized InSb[J]. Infrared Technology , 2012, 34(4): 191-195. DOI: 10.3969/j.issn.1001-8891.2012.04.002
Authors:YU Li-jing    LI Yan-dong    XIN Si-shu    GUO Yu-hang    YANG Wen-yun
Affiliation:(Kunming Institute of Physics,Kunming 650223,China)
Abstract:Anodic oxide has been grown on InSb substrate, then the MOS device was fabricated after a layer of Cr/Au gate electrode was evaporated on the oxide. By measuring the capacitance-voltage characteristic at 77K, The electrical properties of the interface, such as impurity concentration, interface state density, fixed charges density mobile ions density has been studied. The conclusions indicate that the properties of the MOS structures are strongly affected by the fabrication procedures, which can provide reference for surface passivation technology.
Keywords:anodic oxide,MIS device,C-V characteristic,interface state density
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《红外技术》浏览原始摘要信息
点击此处可从《红外技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号