| 光学四象限分光器参数的优化设计 |
| |
| 引用本文： | 廖周,汤国茂. 光学四象限分光器参数的优化设计[J]. 光电工程, 2003, 30(5): 7-10 |
| |
| 作者姓名： | 廖周 汤国茂 |
| |
| 作者单位： | 中国科学院光电技术研究所,四川,成都,610209;中国科学院光电技术研究所,四川,成都,610209 |
| |
| 基金项目： | 国家863高技术项目资助 |
| |
| 摘 要： | 以几何光学的矩阵变换为基础，通过光线追迹的方法，对四象限分光的多透镜成像复杂光学系统进行仿真建模。由所得到的基本参数的关系曲线，优化确定系统的放大镜放大系数为20，分光镜离轴距离为3mm，系统出瞳直径1mm。对复杂光学系统参数的优化提供了新的思路和方法。
|
| 关 键 词： | 分光系统 光线追迹 数学模型 优化设计 |
| 文章编号： | 1003-501X(2003)05-0007-04 |
| 收稿时间： | 2003-03-14 |
Optimization Design for Parameters of Optical Four-Quad Splitter |
| |
| LIAO Zhou,TANG Guo-mao. Optimization Design for Parameters of Optical Four-Quad Splitter[J]. Opto-Electronic Engineering, 2003, 30(5): 7-10 |
| |
| Authors: | LIAO Zhou TANG Guo-mao |
| |
| Abstract: | With matrix conversion of geometry optics as a basis, simulation and modeling for complex multi-lens imaging optical system for four-quad splitting are carried out through light ray trace. According to the relation curves obtained from the basic parameters, optimization process of the system says that amplifying coefficient of an amplifying lens is 20, off-axis distance of the splitter 3mm and exit pupil diameter of the system 1mm. New ideas and methods are provided for the parameters of the complex optical system. |
| |
| Keywords: | Light-splitting systems Ray-tracing Mathematical models Optimum design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
