| 钛合金材料在高酸性环境中的耐蚀性能研究 |
| |
| 引用本文： | 闫静,吴贵阳,吴华,刘志德,袁曦,谷坛.钛合金材料在高酸性环境中的耐蚀性能研究[J].石油与天然气化工,2014,43(2):165-167. |
| |
| 作者姓名： | 闫静 吴贵阳 吴华 刘志德 袁曦 谷坛 |
| |
| 作者单位： | [1]中国石油西南油气田公司天然气研究院 [2]国家能源高含硫气藏开采研发中心 [3]中国石油天然气集团公司高含硫气藏开采先导试验基地 |
| |
| 摘 要： | 采用光学显微镜研究了钛合金及其焊缝的显微组织,采用电化学失重挂片法、NACE TM0177A法(恒负荷拉伸试验)和四点弯曲法研究了钛合金及其焊缝在高酸性环境中的电化学腐蚀性能和抗环境开裂腐蚀性能。研究结果表明,TA2基材为单一的α相组成,焊缝组织由大块α+α相或者大块α+片状α+α相组成,热影响区的组织比焊缝组织细小。在高酸性环境中,钛合金具有很好的耐蚀性能。
|
| 关 键 词： | 钛合金 高酸性环境 耐蚀性能 |
| 收稿时间： | 2013/9/20 0:00:00 |
Corrosion resistance of titanium alloy in high sour environment |
| |
| Yan Jing,Wu Guiyang,Wu Hu,Liu Zhide,Yuan Xi and Gu Tan.Corrosion resistance of titanium alloy in high sour environment[J].Chemical Engineering of Oil and Gas,2014,43(2):165-167. |
| |
| Authors: | Yan Jing Wu Guiyang Wu Hu Liu Zhide Yuan Xi and Gu Tan |
| |
| Affiliation: | 1. Research Institute of Natural Gas Technology, PetroChina Southwest Oil ＆ Gasfield Company,Chengdu 610213, Sichuan, China ; 2. National Energy R＆D Center of High Sulfur Gas Exploitation,Chengdu 610213, Sichuan, China; 3. High Sulfur Gas Exploitation Pilot Test Center, CNPC, Chengdu 610213, Sichuan, China) |
| |
| Abstract: | The optical microscope was used to research microstructure of Titanium alloy and its welds , then corrosion weight loss method , NACE TM0177 A method （Standard Tensile Test） and standard Bent-Beam test method were used to research corrosion resistance perform-ance of electrochemistry and environmental cracking in high sour environment . The results showed that the microstructure of TA2 was singleαphase ,welds were big α＋αphase or blockα＋flaky α＋αphase ,and microstructure of heat affected zone was tinier than welds .Titanium al-loy had good corrosion resistance in high sour environment . |
| |
| Keywords: | titanium alloy high sour environment corrosion resistance performance |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《石油与天然气化工》浏览原始摘要信息 |
|
点击此处可从《石油与天然气化工》下载全文 |
|
