| 钢包加硅吹氧升温热模拟试验 |
| |
| 引用本文： | 潘贻芳 李永来. 钢包加硅吹氧升温热模拟试验[J]. 炼钢, 1993, 9(6): 27-30,6 |
| |
| 作者姓名： | 潘贻芳 李永来 |
| |
| 作者单位： | 天津钢厂钢铁研究所，天津钢厂钢铁研究所，天津钢厂钢铁研究所 |
| |
| 摘 要： | 在５００ｋｇ中频感应炉内进行的热模拟试验结果表明，加硅吹氧升温是有效的，升温处理后钢液中残存的［Ｓｏｌ．Ａｌ］基本能控制在０．００７以下，满足小方坯连铸对钢水成分的要求。
|
| 关 键 词： | 中频感应炉 吹氧升温 熔融金属罐 |
HOT MODEL TEST ON TEMPERATURE RISE BY BLOWING OXYGEN ALONG WITH Si ADDITION IN LADLE |
| |
| Pen Yifang Li Yonglai Wang Yanming. HOT MODEL TEST ON TEMPERATURE RISE BY BLOWING OXYGEN ALONG WITH Si ADDITION IN LADLE[J]. Steelmaking, 1993, 9(6): 27-30,6 |
| |
| Authors: | Pen Yifang Li Yonglai Wang Yanming |
| |
| Affiliation: | Iron & Steel Research Institute of Tianjin Iron and Steel Works |
| |
| Abstract: | Results of hot model test conducted at a 500kg medium frequency induction furnace show that the effective way to raise temperature is to blow oxygen and add silicon simultaneously into the ladle. By doing so the [Sol. Al] can be kept well below 0.007%,which comes up to the requirements of continuous casting billets with regard to the chemical compositions. |
| |
| Keywords: | ladle medium frequency induction furnace raising temperature oxygen blow |
| 本文献已被 CNKI 维普 等数据库收录！ |
