首页 | 本学科首页   官方微博 | 高级检索  
     

高速双圆弧齿轮的动载荷试验研究
引用本文:余跃进,陈谌闻,陈式椿,陈荣增.高速双圆弧齿轮的动载荷试验研究[J].机械工程学报,1995(5).
作者姓名:余跃进  陈谌闻  陈式椿  陈荣增
作者单位:哈尔滨工业大学
摘    要:用微型电阻应变片测试了高速双圆弧齿轮的齿根动态应力,并测得两组参数的双圆弧齿轮的动载系数。探索了一些高速齿轮齿根动态应力的测试方法及规律。发现在相同条件下,动载系数将随着载荷的增加而下降,当转速低于共振转速时,动载系数随着转速的增加而增大,当转速超过共振转速时,动载系数将随着转速的增加而减小。

关 键 词:圆弧齿轮,动载荷,齿根应力

EXPERIMENTAL STUDY OF DYNAMIC LOAD OF HIGH SPEED HELICAL GEARS WITH DOUBLE-CIRCULAR-ARC TOOTH PROFILE
Yu Yuejing,Chen Chenwen, Chen Shichun,Chen Yongzeng.EXPERIMENTAL STUDY OF DYNAMIC LOAD OF HIGH SPEED HELICAL GEARS WITH DOUBLE-CIRCULAR-ARC TOOTH PROFILE[J].Chinese Journal of Mechanical Engineering,1995(5).
Authors:Yu Yuejing  Chen Chenwen  Chen Shichun  Chen Yongzeng
Affiliation:Harbin Institute of Technology
Abstract:The dynamic root stress of high speed helical gears with double-circle-arctooth Profile and the dynamic factor of two groups of those gears are measured by micro strain gauges. The measured method and regular Pattetn of the dynamic stress were gained from this experimental study.It is found, in the same conditions,the dynamic factor will decrease with load increasing,will increase with rotation rate increasing, when rotation rate lesses resonance rotation rate, and will decrease with rotation rate increasing when rotation rate exceed its resonance rate.
Keywords:W-N gears  Dynamic load  Root stress of gear tooth
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号