| 钛合金深孔枪钻加工研究综述 |
| |
| 引用本文： | 李亮,武鹏,许宁,张柱银.钛合金深孔枪钻加工研究综述[J].工具技术,2017,51(6):3-9. |
| |
| 作者姓名： | 李亮 武鹏 许宁 张柱银 |
| |
| 作者单位： | 1. 盐城工学院;南京航空航天大学;2. 盐城工学院;湖南工业大学;3. 盐城工学院;4. 湖南工业大学 |
| |
| 基金项目： | 国家青年基金项目，江苏省精密与细微制造技术重点实验室开放基金 |
| |
| 摘 要： | 钛合金深孔(特别是小直径深孔)的钻削加工一直是机械制造业的难点,也是研究的重点。本文结合深孔加工的特点和钛合金的切削特性,从枪钻结构、加工工艺、振动钻削和加工稳定性四个方面对钛合金深孔枪钻加工技术的研究现状进行了分析和总结,指出了目前深孔枪钻加工存在的问题,并展望了今后的研究方向。
|
| 关 键 词： | 枪钻 深孔加工 钛合金 |
Summarization of Research on Deep-hole Gun Drilling in Titanium Alloy |
| |
| Li Liang,Wu Peng,Xu Ning,Zhang Zhuyin.Summarization of Research on Deep-hole Gun Drilling in Titanium Alloy[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2017,51(6):3-9. |
| |
| Authors: | Li Liang Wu Peng Xu Ning Zhang Zhuyin |
| |
| Abstract: | The drilling of titanium alloy deep-holes,especially small deep holes,has been the difficulty of mechanical manufacturing,but also the focus of the study.In this paper,based on the characteristics of deep-hole machining and the machinability of titanium alloy,the research status of deep-hole gun drilling technology of titanium alloy was analyzed and summarized from four aspects:gun drill structure,processing technology,vibration drilling and machining stability.The problems existing in the deep-hole gun drilling were pointed out,and the future research direction was forecasted. |
| |
| Keywords: | gun drill deep-hole machining titanium alloy |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
