Titanium oxy-nitride films deposited on stainless steel by an ion beam assisted deposition technique

Surfaces of stainless steel SUS304 were coated with titanium oxy-nitride (TiON) films at temperatures of 400–770°C using an ion-beam assisted deposition technique constructed from an electron beam evaporator for Ti evaporation and a microwave ion source for ionizing nitrogen gas. The N ions were accelerated at energies of 0.5–2.0 keV. Most of the deposited TiON films consisted of (60–80)% TiN and (40–20)% TiO₂, and the fraction of TiO₂ increased with increasing substrate temperature. Hardness of the TiNO films varied in the range from 160 GPa to 260 GPa with increasing substrate temperature. The titanium oxy-nitride film could be deposited on stainless steel without a significant deterioration surface layer at 600°C. However, when TiNO films were deposited at temperatures higher than 700°C, the thickness of the TiNO films were significantly thinner and a thick layer containing nitride such as Cr₂N, CrFe, Fe₂N and Fe₄N was formed in a near surface region of stainless steel because more nitrogen diffused into stainless steel.