| 提高磁控管用钼丝质量研究 |
| |
| 引用本文： | 朱峰,吴兴刚,杨秦莉. 提高磁控管用钼丝质量研究[J]. 中国钼业, 2008, 32(6): 50-53 |
| |
| 作者姓名： | 朱峰 吴兴刚 杨秦莉 |
| |
| 作者单位： | 金堆城钼业股份有限公司金属分公司,陕西,西安,710100 |
| |
| 摘 要： | 论述了以φ7.4mm轧制钼杆为原料，通过增加中间退火，优化工艺参数，提高模具质量，改进加工设备，解决了φ1.54mm成品钼丝的表面和内在质量，最大程度减少钼丝的头、尾劈裂，使整根钼丝的直径公差和性能一致均匀，椭圆度得到保证。
|
| 关 键 词： | 劈裂 硬度 退火点 在线氧化退火 |
STUDY ON IMPROVING THE QUALITY OF MAGNETRON MOLYBDENUM WIRE |
| |
| ZHU Feng,WU Xing-gang,YANG Qin-li. STUDY ON IMPROVING THE QUALITY OF MAGNETRON MOLYBDENUM WIRE[J]. China Molybdenum Industry, 2008, 32(6): 50-53 |
| |
| Authors: | ZHU Feng WU Xing-gang YANG Qin-li |
| |
| Affiliation: | ZHU Feng,WU Xing-gang,YANG Qin-li(Metal Brarch,Jinducheng Molybdenum Co.,Ltd,Xi'an 710100,Shaanxi,China) |
| |
| Abstract: | In this paper, rolling φ7.4mm to Mo for bar material, by increasing the annealing in the middle, optimizing process parameters , enchancing the quality of mold and improvingprocessing equipment , the surface and internal quality of φ1.54mm molybdenum wire were solved , the head splitting and end splitting of molybdenum wire were reduced to a minimum, so diameter tolerance and pedormanee o f the whole root molybdenum wire were the same uniform , ensured the eUiptieity of molybdenum wire. |
| |
| Keywords: | splitting hardness annealing point on-line oxide annealing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
