Effect of intermittent polishing on low-cycle fatigue of pure aluminium |
| |
Authors: | M. Çapa Ş. Güleç |
| |
Affiliation: | (1) Faculty of Mechanical Engineering, Technical University of Istanbul, TU, Turkey |
| |
Abstract: | Low-cycle fatigue tests of aluminium were interrupted in order to remove surface roughening and superficial cracks produced by prior loading. Depending on the frequency of intermittent polishing and the strain level considerable increases in endurance life were observed.Nomenclature t total strain range - p plastic strain range - e elastic strain range - Np the number of cycles at which the intermittent polishing is carried out (single-step tests) - Nmp the number of cycles at which the last intermittent polishing action is performed in addition to preceding ones in every 50 cycles (multi-step tests) - Npf the endurance life in the case of intermittent polishing (single- or multi-step tests) - Nf the endurance life without intermittent polishing |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|