首页 | 本学科首页   官方微博 | 高级检索  
     

螺栓杆应力集中系数的研究
引用本文:杜运兴, 欧阳卿, 周芬. 螺栓杆应力集中系数的研究[J]. 工程力学, 2014, 31(10): 174-180. DOI: 10.6052/j.issn.1000-4750.2013.05.0389
作者姓名:杜运兴  欧阳卿  周芬
作者单位:湖南大学土木工程学院,湖南,长沙 410082
基金项目:国家自然科学基金项目(51108174,51378199)
摘    要:螺栓球节点栓杆上的应力集中是导致栓杆发生疲劳破坏的主要原因。该文通过理论推导及数值分析的方法研究了螺栓杆的应力集中系数。在忽略螺纹升角的情况下,根据变形协调条件研究了螺栓杆的轴力梯度变化,采用数值计算确定常用螺栓球的螺纹位移系数及螺纹力计算公式。采用局部建模,通过迭代计算的方法确定螺栓杆应力集中系数。与完整模型的计算结果比较表明该方法的计算结果具有较高的精度,且计算效率高。

关 键 词:应力集中  系数  螺栓  数值计算  迭代
收稿时间:2013-05-04
修稿时间:2013-08-27

STUDY ON STRESS CONCENTRATION FACTOR OF BOLT SCREW
DU Yun-xing, OUYANG Qing, ZHOU Fen. STUDY ON STRESS CONCENTRATION FACTOR OF BOLT SCREW[J]. Engineering Mechanics, 2014, 31(10): 174-180. DOI: 10.6052/j.issn.1000-4750.2013.05.0389
Authors:DU Yun-xing  OUYANG Qing  ZHOU Fen
Affiliation:College of Civil Engineering, Hunan University, Changsha, Hunan 410082, China
Abstract:Stress concentration in the bolt screws of bolt-sphere joints is the main reason for bolt screw fatigue failure. These stress concentrations in bolt screws were studied through theoretical derivation and numerical analysis. Ignoring lead angle, the variation of axial force gradient was obtained according to the deformable coordination condition. In addition, thread displacement factor and thread force were determined by numerical computation. The stress concentration factor in the bolt screw was developed through iteration using local modeling. Compared with the calculation results from whole models, the method proposed in this paper has higher computing accuracy and efficiency.
Keywords:stress concentration  factor  bolt  numerical computation  iteration
本文献已被 CNKI 等数据库收录!
点击此处可从《工程力学》浏览原始摘要信息
点击此处可从《工程力学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号