Electro-oxidative abatement of low-salinity reverse osmosis membrane concentrates

The present study encompasses the application of electrolysis as novel treatment technique for the abatement of low-salinity concentrates generated from the filtrative treatment of water and wastewater. Four different materials have been tested as anode for a number of brine samples in a one-compartment electrolytic cell in galvanostatic mode. It was found that PbO(2) and SnO(2) anodes initiated electrochemical precipitation through an increase of the pH. Boron-doped diamond (BDD) and RuO(2) anodes successfully oxidised the pollutants in the brine and a linear removal of total ammonia nitrogen (TAN) and chemical oxygen demand (COD) was observed during the first phase of oxidation. Oxidation was predominantly achieved through indirect hypochlorite bulk oxidation; the higher oxidation rate and extent for the BDD anode was attributed to the higher selectivity and activity of the latter. Overall performance of the BDD electrode was higher than for RuO(2): higher rates for TAN (17.9 vs. 13.5mg/Ah) and COD (74.5 vs. 20.0mg/Ah) removal as well as higher overall current efficiencies (35.2% vs. 14.5%). Extensive colour removal was observed for both anodes (>90% decrease in absorbency at 455 nm).