| Ultrahigh performance of Ti-based glassy alloy tube sensor for Coriolis mass flowmeter |
| |
| 引用本文： | 马朝利 A．INOUE 张涛. Ultrahigh performance of Ti-based glassy alloy tube sensor for Coriolis mass flowmeter[J]. 中国有色金属学会会刊, 2006, 16(A02): 202-205 |
| |
| 作者姓名： | 马朝利 A．INOUE 张涛 |
| |
| 作者单位： | [1]School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China [2]Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan |
| |
| 基金项目： | Project supported by the New Energy and Industrial Technology Development 0rganization （NED0） of Japan |
| |
| 摘 要： | Bulk metallic glasses （BMGs） have potential applications for both structural and functional components owing to their good mechanical properties. With the aim of demonstrating great engineering value of BMGs, a direct melt-forming technique based on suction casting for the production of glassy alloy tubes was developed. The fabrication, structure, geometry, properties and sensor performance of the tubes were examined. The results show that the Coriolis mass flowmeters using the Ti-based glassy alloy sensor tube exhibit excellent measurement sensitivity, viz. 28.5 times higher than that of the conventional flowmeter manufactured using stainless steel （SUS316） tube.
|
| 关 键 词： | 钛基玻璃合金管 科里奥利质量流量计 传感器 超高性能 |
| 收稿时间： | 2006-04-20 |
| 修稿时间： | 2006-06-30 |
Ultrahigh performance of Ti-based glassy alloy tube sensor for Coriolis mass flowmeter |
| |
| MA Chao-li, A. INOUE, ZHANG Tao. Ultrahigh performance of Ti-based glassy alloy tube sensor for Coriolis mass flowmeter[J]. Transactions of Nonferrous Metals Society of China, 2006, 16(A02): 202-205 |
| |
| Authors: | MA Chao-li A. INOUE ZHANG Tao |
| |
| Abstract: | |
| |
| Keywords: | glassy alloy tube sensor performance Coriolis mass flowmeter |
| 本文献已被 维普 等数据库收录！ |
